湖南大学材料科学与工程学院研究生导师：蒋福林

• 2025考研英语全程班 早鸟3班
• 26考研全科上岸规划营「择校▪规划▪备考」
• 湖南大学2025考研专业课复习资料「真题▪笔记▪讲义▪题库」

蒋福林，男，博士及博士后，助理教授、硕士生导师。团队成员有张辉教授、滕杰教授、傅定发副教授和吴落义老师。

邮箱：jfling2820@163.com; fulin.jiang.88@hnu.edu.cn; 电话：

地址：湖南大学 材料科学与工程学院 314 房间(湖南省长沙市岳麓区麓山南路1号 邮编：410082)

热忱欢迎具有金属材料、材料加工/成型、材料物理及数学建模等背景的本科、硕士及博士生加入本课题组(张辉教授团队)!

基本信息

蒋福林，男，1988年3月出生，江西吉安人，中共党员，湖南大学和McMaster University联合培养博士(工学)，Kyushu University博士后研究员及助理教授，现担任湖南大学材料科学与工程学院金属材料与控制工程系助理教授、硕士生指导教师(张辉 教授团队)，以及Materials & Design、Journal of Alloys and Compounds、Journal of Materials Research和Transactions of Nonferrous Metals Society of China等材料领域国际知名期刊通信评审专家。目前主要研究方向包括金属材料强韧化机理、力学与组织定量物理模型、塑性变形基础理论、加工工艺及高性能轻量化合金设计等，正主持湖南大学科研启动项目等，曾经主持湖南省研究生科研创新项目，作为主要参与人完成了“973”项目子课题、科技部国际合作计划项目、国家自然科学基金和教育部博士点基金等国家级、省部级重要科研课题，同时主要负责完成了日本学术振兴会(JSPS)重点基础研究项目，取得了一系列研究成果。相关研究成果已在国际知名SCI学术期刊上发表，共30余篇，包括International Journal of Plasticity， Metallurgical and Materials Transactions A，Materials & Design，Journal of Alloys and Compounds，Materials Characterization，Materials Science and Engineering: A，ISIJ International和Journal of Materials Science等学术期刊。

教育背景

(1) 2013–2015, McMaster University(加拿大), 材料科学与工程, 博士联合培养, 导师: G.R. Purdy和H.S. Zurob 教授

(2) 2012–2015, 湖南大学, 材料科学与工程, 博士, 导师: 张辉 教授

(3) 2010–2012, 湖南大学, 材料科学与工程, 硕士(硕博连读)导师: 张辉 教授

(4) 2006–2010, 湖南大学, 材料成型及控制工程, 学士(推荐免试研究生)

工作履历

(1) 2019–至今, 湖南大学, 材料科学与工程学院, 助理教授 (张辉 教授团队)

(2) 2016–2018, Kyushu University(日本), 博士后研究员、助理教授, 合作导师: S. Takaki和T. Tsuchiyama 教授

研究领域

团队研究方向：金属基复合材料;合金热力作用下的物理模拟、模型及机理;连续大塑性变形技术及相关理论;微细结构材料制备、组织与性能表征

本人主要研究方向：

[1] 轻量化金属材料(铝合金、高强/低密度钢、钛合金及镁合金等)设计、塑性加工(实验及有限元模拟)、显微组织定性定量表征及强韧化机理研究;

[2] 高性能钢铁、铝合金及金属基复合材料开发、性能调控及力学行为研究;

[3] 材料力学与显微组织定量关系的物理模型及模拟研究;

[4] 金属材料服役性能、断裂理论及相关应用研究。

学术成果

ORCID ID: https://orcid.org/0000-0002-2430-5867

自2019年起部分代表作(“*”：通讯作者)：

[1] Fulin Jiang *, Takuro Masumura, Kentaro Hirata, Toshihiro Tsuchiyama, Setsuo Takaki, A new diffraction line profile breadth analysis approach for evaluating plastic lattice strain anisotropy in cold-worked nickel under various strain paths, International Journal of Plasticity 112 (2019) 89-107.

[2] Kunyang Chen, Jie Tang, Fulin Jiang *, Jie Teng, Dingfa Fu, Hui Zhang *, The role of various Zr additions in static softening behavior of Al-Zn-Mg-Cu alloys during interval holding of double-stage hot deformation, Journal of Alloys and Compounds 792 (2019) 1112-1121.

[3] Fulin Jiang *, Takuro Masumura, Toshihiro Tsuchiyama, Setsuo Takaki, Effect of substitutional element addition on Hall-Petch relationship in interstitial free ferritic steels, ISIJ International (2019) In press.

[4] Huan Cai, Jiamin Hu, Fulin Jiang, Dingfa Fu, Jie Teng, Hui Zhang, A novel repetitive continuous welding extrusion for refining grain size and evading strength-ductility trade-off in AZ31 magnesium alloy, Materials Science and Engineering: A 753 (2019) 192-196.

[5] Guowei Bo, Fulin Jiang, Zhaoyu Dong, Guan Wang, and Hui Zhang, Revealing the influence of pre-precipitation microstructure on hot workability in an Al-Cu-Mg-Zr alloy, Materials Science and Engineering: A 755 (2019) 147-157.

2019年之前代表性论文(“*”：通讯作者)：

[1] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Xiang Wang, Hui Zhang, Characterization of the isothermal precipitation kinetics of an Al-Zn-Mg-Cu alloy,Metallurgical and Materials Transactions A 49(10) (2018) 5157-5168.

[2] Fulin Jiang, Hui Zhang, Xianna Meng, Luoxing Li, Effects of Ti addition on the microstructures and mechanical properties of the Al-Mn-Mg-RE alloy, Materials & Design 55 (2014) 280-285.

[3] Fulin Jiang, Hui Zhang, Non-isothermal precipitation kinetics and its effect on hot working behaviors of an Al-Zn-Mg-Cu alloy, Journal of Materials Science 53 (4) (2018) 2830-2843.

[4] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Static softening following multistage hot deformation of 7150 aluminum alloy: experiment and modeling, Materials Science & Engineering A 648 (2015) 164-177.

[5] Fulin Jiang, Hui Zhang, Luoxing Li, Jianghua Chen, The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy, Materials Science & Engineering A 552 (2012) 269- 275.

[6] Fulin Jiang, Hui Zhang, Xiankun Ji, Xianna Meng, Luoxing Li, Comparative hot deformation characters of Al-Mn-Mg-RE alloy and Al-Mn-Mg-RE-Ti alloy, Materials Science & Engineering A 595(10) (2014) 10-17.

[7] Fulin Jiang, Hui Zhang, Jian Su, Yishan Sun, Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression, Materials Science & Engineering A 636 (2015) 459-469.

[8] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Characterizing precipitate evolution of an Al-Zn-Mg-Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring, Materials Characterization 117 (2016) 47-56.

[9] Fulin Jiang *, Kentaro Hirata, Takuro Masumura, Toshihiro Tsuchiyama, Setsuo Takaki, Effect of the surface layer strained by mechanical grinding on X-ray diffraction analysis, ISIJ International 58(2) (2018) 376-378.

[10] Fulin Jiang, Jie Tang, Dinfa Fu, Jianping Huang, Hui Zhang, A Correction to the Stress-Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors, Journal of Materials Engineering and Performance 27 (2018) 3083-3090.

[11] Fulin Jiang, Hui Zhang, Shuchu Weng, Dingfa Fu, Characterization of dynamic microstructural evolution of 7150 aluminum alloy at high strain rate during hot deformation, Trans. Nonferrous Met. Soc. China 26 (1) (2016) 51-62.

[12] Setsuo Takaki, Fulin Jiang *, Takuro Masumura, Toshihiro Tsuchiyama, Correction of elastic anisotropy in Williamson-Hall plots by diffraction Young’s modulus and direct fitting method, ISIJ International 58(4) (2018) 769-775.

[13] Setsuo Takaki, Takuro Masumura, Fulin Jiang *, Toshihiro Tsuchiyama, Effect of instrumental correction on X-ray line profile analysis in cold rolled ferritic steel, ISIJ International 58(6) (2018) 1181-1183.

[14] Hui Zhang, Fulin Jiang, Xiaoyang Shang, Luoxing Li, Flow stress and microstructural evolution of the horizontal continuous casting Al-0.96Mn-0.38Si-0.18Fe alloy during hot compression, Materials Science & Engineering A 571 (2013) 25-32.

[15] Yishan Sun, Fulin Jiang, Hui Zhang, Jian Su, Wuhua Yuan, Residual stress relief in Al-Zn-Mg-Cu alloy by a new multistage interrupted artificial aging treatment, Materials & Design 92 (2016) 281-287.

[16] Setsuo Takaki, Daichi Akama, Fulin Jiang, Toshihiro Tsuchiyama, Correction of the Williamson-Hall Plots by the Diffraction Young’s Modulus, Journal of the Society of Materials Science, Japan 67 (3) (2018) 383-388.

[17] Setsuo Takaki, Takuro Masumura, Fulin Jiang, Toshihiro Tsuchiyama, Relation between elastic constants and elastic anisotropy in metals, Journal of the Society of Materials Science, Japan 67(9) (2018) 855-860.

[18] Xiankun Ji, Hui Zhang, Song Luo, Fulin Jiang, Dingfa Fu, Microstructures and properties of Al-Mg-Si alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process, Materials Science & Engineering A 649 (2016) 128-134.

[19] Can Liu, Hui Zhang, Fulin Jiang, Characterization of dynamic microstructure evolution during hot deformation of the Al-4.10Cu-1.42Mg-0.57Mn-0.12Zr alloy, Trans. Nonferrous Met. Soc. China 24 (2014) 3477-3485.

[20] Jiamin Hu, Jie Teng, Xiankun Ji, Xiangxin Kong, Fulin Jiang, Hui Zhang, Microstructural Characteristic of the Al-Fe-Cu Alloy During High-Speed Repetitive Continuous Extrusion Forming, Journal of Materials Engineering and Performance 25(11) (2016) 4769-4775.

[21] Setsuo Takaki, Takuro Masumura, Fulin Jiang, Toshihiro Tsuchiyama, Evaluation of Dislocation Density in Cold Worked Low Carbon Ferritic Steel, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104 (11), (2018) 683-688.

[22] Takuro Masumura, Setsuo Takaki, Fulin Jiang, Toshihiro Tsuchiyama, Discussion about procedure for determining parameter α in Modified Williamson-Hall method, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104(11), (2018) 717-719.

国际会议:

[1] Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, edited by: Matthias Militzer, Gianluigi Botton, Long-Qing Chen, James Howe, Chadwick Sinclair, and Hatem Zurob. In situ characterization of precipitate formation and dissolution in an Al-Zn-Mg-Cu alloy by electrical resistivity measurement, International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM-2015), 06 (2015) 727-734. (Whistler, Canada)

[2] T. Tsuchiyama, Y. Ono, Fulin Jiang, S. Takaki, Effect of Chemical Composition on the Ductile-to-Brittle Transition on Fe-Mn-C Ternary Alloy, ICAS 2016 & HMnS (2016) 57-59. (Chengdu, China)

[3] Fulin Jiang, D. Akama, T. Tsuchiyama, S. Takaki, Role of silicon addition in grain refinement strengthening of ferritic steel, CAMP-ISIJ 30 (2017) 368. (Tokyo, Japan)

[4] Fulin Jiang, K. Hirata, T. Tsuchiyama, S. Takaki, Correlation between grain boundary segregation and Hall-Petch coefficient in Fe-Si steels, CAMP-ISIJ 30 (2017) 867. (Sapporo, Japan)

[5] K. Hirata, Fulin Jiang, T. Tsuchiyama, S. Takaki, Effect of annealing time on yield strength of Fe-3mass% Si ferritic steel, CAMP-ISIJ 30 (2017), 866. (Sapporo, Japan)

[6] Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Direct correction of the elastic anisotropy in Williamson-Hall plots for cold worked metals, EUROMAT-2017 (2017). (Thessaloniki, Greece).

[7] Setsuo Takaki, Fulin Jiang, Daichi Akama, Toshihiro Tsuchiyama, Application of direct fitting method to the modified Williamson-Hall method, EUROMAT-2017 (2017). (Thessaloniki, Greece)

[8] Takuro Masumura, Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Evaluation of dislocation density in cold worked austenitic steel SUS316L, EUROMAT-2017 (2017). (Thessaloniki, Greece).

申请专利：

[1] 张辉，孙轶山，蒋福林，袁武华. 一种保持铝合金强度降低淬火残余应力的时效热处理方法. ZL 2015 1 0295203.2.

[2] 张辉，苏剑，蒋福林，孙轶山. 一种降低Al-Mg-Si合金板材各向异性的工艺方法. ZL 2015 1 0336976.0.

奖励与荣誉

2007年10月： 国家励志奖学金;

2008年10月： 国家励志奖学金，湖南大学三好学生;

2009年10月： 国家励志奖学金;

2011年9月： 湖南大学优秀研究生干部;

2013年6月： 湖南大学博士研究生校长奖学金;

2013年10月： 湖南大学优秀研究生，湖南大学熊晓鸽奖学金;

2014年8月： 湖南大学优秀博士研究生学校奖学金;

2014年10月： 博士研究生国家奖学金;

2017年11月： 湖南大学优秀博士论文。